Search results for " Woven"
showing 7 items of 7 documents
Experimental characterization of dacron 360 woven constitutive behavior
2010
In the present paper some experimental analyses of Dacron© 360 woven aimed to characterize its constitutive behavior are presented. This woven, widely adopted in sail manufacturing, is obtained by weaving polyethylene terephthalate (PET) yarn and it shows some peculiar features due to the manufacturing process. The experimental tests, in terms of tensile tests and cyclic tests, clearly show the orthotropy features of the material, its high strength and deformability. Finally, the examination with optical microscope of the tested specimens allows to evidence how the warp and weft yarns interact.
CFD prediction of scalar transport in thin channels for reverse electrodialysis
2014
Reverse ElectroDialysis (RED) is a very promising technology allowing the electrochemical potential difference of a salinity gradient to be directly converted into electric energy. The fluid dynamics optimization of the thin channels used in RED is still an open problem. The present preliminary work focuses on the Computational Fluid Dynamics (CFD) simulation of the flow and concentration fields in these channels. In particular three different configurations were investigated: a channel unprovided with a spacer (empty channel) and two channels filled with spacers, one made of overlapped filaments the other of woven filaments. The transport of two passive scalars, representative of the ions …
Experimental and computational investigation of heat transfer in channels filled by woven spacers
2017
Abstract Models of woven-type spacer-filled channels were investigated by Computational Fluid Dynamics (CFD) and parallel experiments in order to characterize the performance of Membrane Distillation (MD) modules. The case of overlapped spacers was analysed in a companion paper. Experiments were based on a non-intrusive technique using Thermochromic Liquid Crystals (TLC) and digital image processing, and provided the distribution of the local convective heat transfer coefficient on a thermally active wall. CFD simulations ranged from steady-state conditions to unsteady and early turbulent flow, covering a Reynolds number interval of great practical interest in real MD applications. A specif…
EFFECT OF SURFACE FINISH ON THE TENSILE BEHAVIOR OF DACRON© 360 WOVEN
2011
Nel presente lavoro vengono presentate alcune indagini sperimentali mirate alla caratterizzazione dell’effetto del trattamento superficiale sul comportamento costitutivo di un tessuto in Dacron© 360. Tale tessuto, largamente utilizzato nella realizzazione di vele, è ottenuto dalla tessitura di fili di polietilene tereftalato (PET) e presenta alcune peculiarità dovute al processo manifatturiero. Le prove di trazione realizzate evidenziano le caratteristiche di ortotropia del materiale e l’effetto del trattamento superficiale che si manifesta principalmente in un comportamento più rigido nella direzione dell’ordito ed in quella inclinata e in un aumento della resistenza ultima in tutte le dir…
CFD PREDICTION OF SCALAR TRANPORT IN THIN CHANNELS FOR REVERSE ELECTRODIALYSIS
2014
Reverse ElectroDialysis (RED) is a very promising technology allowing the electrochemical potential difference of a salinity gradient to be directly converted into electric energy. Fluid dynamics optimization of the thin channels to be devoted for the RED process is still an open problem. The present preliminary work focuses on the Computational Fluid Dynamics (CFD) simulation of the flow and concentration fields in these channels. In particular three different configurations were investigated: a channel unprovided with a spacer and two different spacer (made of either overlapped filaments or woven filaments) filled channels. Two passive scalars were transported along with the water in orde…
Improved method of manufacturing carbon nanotube infused multifunctional 3D woven composites
2021
This research work aimed to develop smart multifunctional composites via a process for uniformly dispersing carbon nanotubes (CNT) on an orthogonal three-dimensional (3D) woven glass fabric with minimised filtering effect. These smart composites could detect strain under tensile and flexural loading by the piezoresistive response of the infused CNT network. Conventional vacuum assisted resin transfer moulding was modified to control the infusion of 0.25 wt% CNT on the 3D woven glass fabric by varying the vacuum pressure. Results showed that at 101.3 kPa vacuum pressure, the CNT percolated through the thickness of the orthogonal 3D woven glass fabric while being marginally filtered by the f…
Effect of surface finish on the mechanical behaviour of Dacron© 360 woven
2013
Abstract In the present paper some experimental analyses of Dacron© 360 woven with and without surface treatment are presented to evaluate the effect of this treatment on the constitutive behaviour. This woven, widely adopted in sail manufacturing, is obtained by weaving polyethylene terephthalate (PET) yarn and it shows some peculiar features due to the manufacturing process. The experimental tensile tests, clearly show the orthotropy behaviour of the material. The effect of the treatment results in a stiffer behaviour especially along the warp and bias direction and in an increment of ultimate strength in all directions.